DJI Quick tips - Inspire 2 - Mounting and Using the Handle Grips

Inspire 2, mounting and using the handle grips. Prepare the Inspire 2 handle grips and aircraft. Ensure that the aircraft is powered off and it is in landing mode. Attach the lock to the frame arm as shown. Make the white mark face the aircraft’s nose direction. Ensure that the direction of the installation matches with that of the stiffeners as shown. Secure the 2 screws. Rotate the securing ring on the handle to the unlock position and make sure that the white line is aligned with the white dot on the lock. Insert the handle. Rotate the securing ring to the locked position and ensure that the white line is aligned with the red dot. Perform the same steps to install the remaining lock and handle on the other side. Ensure that the lock is mounted properly. Otherwise it may affect the landing gear when rising and lowering. The handle can be removed when storing the aircraft in the carrying case. For safety reasons when handled shooting or recording ensue that the motors are off and the propellers are removed.