Take the Panasonic Lumix GX Vario PZ 14-42mm f/3.5-5.6 Power O.I.S lens as an example. Mount the BR-037-17 balancing ring. Then mount the BR-037-6 balancing ring. The installation is complete and the Zenmuse X5S can be used normally. To mount a filter, remove the BR 0-37-6 balancing ring first and then mount the corresponding filter. For the Olympus M.Zuiko 9-18mm/4.0-5.6 lens the BR-052-10 balancing ring and BC-060-78 balancing cap need to be mounted. For other lenses refer to the Zenmuse X5S user manual v1.2 to mount the corresponding balancing ring.
DJI Quick Tips - Inspire 2 - Mounting the Zenmuse X5S Balancing Ring
Recent Articles
-
DJI Inspire 2 - Linking the Aircraft and the Remote Controller
This video will show you how to link...
-
DJI Inspire 2 - Upgrading Aircraft Firmware
This video will show you how to upgrade...
-
DJI Inspire 2 - Upgrading Remote Controller Firmware
This video will show you how to upload...
-
DJI Inspire 2 - Replacing the Gimbal Dampers
Inspire 2, replacing the gimbal dampers. Replace the...
-
DJI Inspire 2 - Activating the Inspire 2
This video will show you how to activate...
