This video will briefly introduce gimbal auto calibration. If the gimbal is not level after calibrating the
IMU please continue with gimbal automatic calibration. The steps are as follows: make sure that the
aircraft is placed on level ground. You can use the level function on your smart phone to ensure that the
surface is level. Do not move it during calibration. Connect the remote controller and the mobile device.
Power on the remote controller and then the aircraft. Launch the DJI Go app on your mobile device. Tap
camera. Tap setup. Tap gimbal. In gimbal menu choose gimbal automatic calibration. Tap OK to start
calibration. Please wait while the gimbal is being calibrated. The app will notify you when the automatic
calibration has been completed. If the camera is still not level after performing the gimbal automatic
calibration please contact DJI after sales support.
Phantom 3 Tutorials- Gimbal Auto-Calibration
Recent Articles
-
DJI Phantom 3 - Activating the Phantom 3 Standard
This video will show you how to activate...
-
Phantom 3 Tutorials- How to install HDMI output module on Phantom 3 remote controller
This video will show you how to install...
-
Phantom 3 Tutorials- IMU functions, calibration and precautions
This video will introduce the IMU module and...
-
Phantom 3 Tutorials- Remote Controller Calibration
This video will show you how to calibrate...
-
Phantom 3 Tutorials- Gimbal Auto-Calibration
This video will briefly introduce gimbal auto calibration....
