Matrice 100 Tutorials - Gimbal Kit Installation

This video will show you how to install your Matric 100 gimbal kit. Please follow these steps. Frist remove the expansion bay kit. Remove the GPS cable. Remove the upper plate of the central frame. Connect 1 side of the 10PIN gimbal cable to the 10PIN port on the main controller. Connect 1 side of the 8PIN gimbal cable to the 8PIN port. Arrange the gimbal cables. Close the upper plate and tighten the screw with a screwdriver. Then connect the GPS cable to the designated port on the side of the central frame. Mount the mounting rails. Place the gimbal quick release part under the gimbal mounting plate and fix it with 4 cruciform screws. Connect the other side of the 8PIN gimbal cable to the 8PIN port of the gimbal buckle. Connect the other side of the 10PIN gimbal cable to the 10PIN port. Connect the gimbal mounting plate to the mounting position on the central frame’s upper plate via 4 vibration absorbers. Place the gimbal on the gimbal quick release port and attach it. The installation is complete.