Matrice 100 Tutorials - How to link the Matrice 100?s controller to the aircraft

This video will show you how to link the Matrice 100’s controller to the aircraft. Please follow these steps. Connect the mobile device, turn on the remote controller. Turn on the battery. Run the DJI Go app on the mobile device. Enter the camera interface. Select RC settings. Select RC control settings. Select linking RC. The DJI Go app will initiate a countdown. The RC’s indicator will blink blue and make the following sound. Please press the red linking button beside the main controller with an appropriate tool. Observe the linking indicator behind the fan. Release the button when it blinks red. Linking is successful when the linking sound stops. Both the linking indicator and the RC indicator should turn solid green. Please contact DJI technical support if linking fails after several attempts.