Skip to next element
Elevate Your Operations with Enterprise Drone Solutions

DJI Inspire 2 - Replacing the Gimbal Dampers

By: Shopify API
DJI Inspire 2 - Replacing the Gimbal Dampers

Inspire 2, replacing the gimbal dampers. Replace the dampers if they are damaged not flexible or cracked. Remove the dampers’ fixing pieces in the forward visions bracket with a Phillips screwdriver. Remove the 3 dampers from the gimbal vibration absorbing board. Do not damage the gimbal quick release port data cable. Mount the new dampers to the gimbal vibration absorbing board. Pay close attention to the installation direction. Ensure that the dampers are mounted in place. Mount the fixing pieces. Pull out the vibration absorbing board and check whether the dampers are firmly attached. Trim off the excess part of the dampers. If they’ve been used 120 times or more than 40 hours it is recommended that you replace the dampers. 

Share on:
Connect with Us
Recent Articles
Tags
magento-156 magento-157 magento-158 magento-159 magento-160 magento-161 magento-162 magento-163 magento-164 magento-165 magento-166 magento-167 magento-277 migrated
DJI Inspire 2 - Upgrading Remote Controller Firmware DJI Inspire 2 - Upgrading Remote Controller Firmware
DJI Inspire 2 - Activating the Inspire 2 DJI Inspire 2 - Activating the Inspire 2
Get the latest news