Phantom 4 Tutorials - How to link your Phantom 4 with its remote controller

This video will show you how to link your Phantom 4 with its remote controller. When the indicator at
the tail of the aircraft flashes yellow quickly and the indicator in the remote controller is solid red the
aircraft needs to be linked with the remote controller. Use the following steps to link them. Launch the
DJI go app. Enter the camera. Select RC settings then select linking RC and press OK. The remote
controller will make the following sound. If the status indicator is flashing blue the remote controller is
ready to be linked. Facing to the right of the aircraft nose find a circular hole in between the SD card slot
and the USB socket. Use a pen or other tool to press the link button inside the hole and hold it for 2
seconds. Afterwards the sound coming from the remote controller will stop and its indicator will turn
solid green. When the app notifies you that linking is complete press OK. Linking is now complete. If
linking fails please try again using the steps in this video. If linking fails repeatedly please contact DJI
after sales support.