Quick Tips - Phantom 3 Standard/SE - Linking the Remote Controller without DJI GO

Fri, Jun 05, 2026 By: Shopify API

Phantom 3 linking the remote controller without DJI Go. Power on the remote controller and the
aircraft. Take the Phantom 3 Standard as an example. Press the link button with a needle tool. Hold it
for 2 seconds and then release. The link button will blink red. Turn the gimbal dial to the far left and
toggle the S2 switch back and forth for at least 3 times at the same time. The remote controller will
make a short beeping sound. When linking is complete the remote controller will stop beeping and the
link button will be solid green.

Share on:

Connect with Us

Tags

magento-179 magento-180 magento-181 magento-182 magento-183 magento-184 magento-185 magento-186 magento-187 magento-188 magento-189 magento-190 magento-191 magento-192 magento-193 magento-194 magento-195 migrated