In this video we will introduce how to link the remote controller and the aircraft. When the rear light of
the aircraft flashes yellow fast and the RC light is solid red it indicates that the RC needs to be linked
with the aircraft. Steps of linking: Connect the mobile device to RC with data cable. Turn on the RC and
aircraft. Run the DJI Go app. Tap enter camera view in the app. Tap RC settings. Tap linking RC. Tap
confirm to link. The RC will emit beeping sounds. The RC light flashes blue and indicates the RC is in the
linking process. Face the left side of the aircraft. Find the second round hole on the vision positioning
module. Press the button with a pen/other tool for 2 seconds and release it. Eh beeping sound
disappears and the RC light turns green. App will show the linking has finished. Tap OK. If the linking fails
please relink the RC. If you have failed to link the RC many times please contact DJI technical support.
Phantom 3 Tutorials- Link the Remote Controller and the aircraft
Recent Articles
-
DJI Phantom 3 SE ? Gimbal Auto Calibration
Gimbal Auto Calibration Phantom 3 SE. Place the...
-
Quick Tips - Phantom 3 Standard/SE - Linking the Remote Controller
Phantom 3 linking the remote controller with DJI...
-
DJI Quick Tips - Phantom 3 Standard/SE - Connecting to the Wi Fi Video Downlink
Phantom 3 connecting to the Wi-Fi video downlink....
-
DJI Quick Tips - Phantom 3 Standard - Resetting the Wi-Fi Video Downlink
Phantom 3 Standard resetting the Wi-Fi video downlink....
-
Quick Tips - Phantom 3 Standard/SE - Linking the Remote Controller without DJI GO
Phantom 3 linking the remote controller without DJI...
