OSMO Tutorials - Activation Steps Before Using OSMO

In this video you will learn how to activate your DJI Osmo. The Osmo activation process has 2 parts: activating the battery and activating the handle. The battery is activated by charging. Connect the battery with the battery charger. The battery has begun charging when the LED light turns red. When using the Osmo for the first time make sure the battery is fully charged. The battery will be fully charged and completely activated when the LED light turns green. Insert the fully charged battery into the Osmo and unlock the gimbal. First unlock the tilt shaft then the roll shaft and finally the pan shaft. After the unlocking is finished power on the Osmo. The gimbal will remain powerless until activation is complete. The LED on the Osmo should turn solid green and the fan should turn on. Connect your mobile device to the Osmo’s Wi-Fi network. The default password is 12341234. Open the DJI Go app and enter the camera interface. When the activation reminder appears press next step. Note: Some Android devices may be unable to show the activation reminder. If so please finish activation using an IOS device. Enter your email address. If your IOS device is connected to a mobile network the app will automatically use mobile data to activate the device. If you’re using an Android device or can’t use a mobile network connect to an available Wi-Fi network. Return to the DJI Go interface and press activate. Then reconnect to the Osmo Wi-Fi network return to the app interface and press activate device. The app will notify you when activation is complete