OSMO Pro Tutorial Video - Upgrading Firmware

This video will show you how to upgrade the firmware on your DJI Osmo Pro/Raw. The upgrade method is the same fir the DJI Osmo Pro and Raw. We will use an Osmo Pro in this video. You can only upgrade Osmo Pro firmware via an SD card. Please ensure the Osmo Pro’s battery is fully charged and there is at last 200MB of free space on the SD card before upgrading. Please ensure the Osmo is upright during the upgrade. It is recommend to place the Osmo on its base during the upgrade. Upgrading should be completed within 30 minutes. Please download the latest upgrade package from the official DJI website. Extract the upgrade package and copy the .bin file into the root directory of the Micro SD card. Ensure the Osmo Pro is powered off and insert the Micro SD card into the SD card slot on the camera. Turn on the Osmo Pro and the camera status indicator will display solid yellow or flash red and green alternatively to indicate the upgrade is in progress. The Osmo Pro’s status indicator will display solid green when the update is completed successfully. If the update has failed the indicator will display solid red. When the update is complete please reboot the Osmo Pro. Connect to the DJI Go app, go to settings, general and about and check the firmware version number. If the update fails please try to update again. If the update fails again please select me in the DJI Go app and contact DJI support