Mavic 2 Series Tutorial - How to Calibrate the IMU

Before calibration please do the following: install the latest version of DJI Go 4. Ensure the aircraft’s battery level is higher than 50%. Turn on the remote controller and connect it with the mobile device. Place the Mavic 2 on a level surface with its arms folded. Turn on the drone. Launch DJI Go 4. When the aircraft connects to the app go to the following menu in the app: settings, flight controller settings, advanced settings, sensors, tap calibrate IMU. Position the aircraft following the instructions in DJI Go 4 during the calibration process. Calibrating the IMU requires turning the Mavic 2 5 times following the sequence. Please do not try to start the motor during calibration. The IMU calibration will fail if the aircraft is not positioned following the instruction in DJI Go 4. After the calibration is complete IMU calibration complete will pop up in DJI Go 4.