Skip to next element
Free shipping over $599

Mavic 2 Enterprise's Intelligent Battery Self-Heating Function

Mavic 2 Enterprise's Intelligent Battery Self-Heating Function

To work better in low temperature environments, the Mavic 2 Enterprise intelligent battery can automatically self-heat to a suitable light temperature. If the batteries temperature is between -10°C to 6°C and the batteries power level is above 50 percent in the battery can self-heat.

The Mavic 2 Enterprise intelligent battery’s self-heating function can be enabled manually or automatically. Turn off the battery, press and hold the batteries button for 5 seconds, then the battery will enter self-heating mode. The battery status indicator will flash on and off slowly and sure the battery level at the same time.

When the battery is self-heating, press and hold the batteries button for 5 seconds to stop the self-heating. If the battery is attached to the aircraft and the aircraft was powered on, then as long as the battery meets the self-heating condition, it will automatically start self-heating. The battery status indicator will flash on and off slowly and show the battery level at the same time.

If the drone is powered off, the battery will stop-heating. If the batteries temperatures above 8°C, the battery will enter the retention state and the battery status indicator will blink clockwise. The battery can stay in the heat retention state for a maximum of 20 minutes. After 20 minutes or if the battery the conditions to stop self-heating, the battery will exit the retention state.

To insure that the battery can self-heat normal, please fully charge the battery before starting the battery self-heating function.

Hit the like button, if this tutorial was helpful. If you need any support with your DJI gear, feel free to contact us via Facebook messenger, by following the link in the description. Thank you for watching.

 

Share on: