Before the update go to the enterprise page on DJI’s official website. Click Zenmuse XT2 and download the latest firmware under downloads. Copy and paste the firmware’s .bin file to the root directory of an SD card. Insert the SD card into the Zenmuse XT2 and mount the Zenmuse XT2 to the drone. Then power on the drone. After the gimbal is powered on and starts the self-check the firmware update will automatically start and the Zenmuse XT will begin to make beeping sounds. Note: Do not power off the drone or remove the gimbal during the update as the camera may be damaged. After the update you can export the log file from the SD card to check the update record. Open the log file and check the word beside result to view the update’s result. If you have any questions contact DJI support.
Zenmuse XT2 | Updating the Firmware
Recent Articles
-
DJI Matrice 200 Series - Updating the Aircraft Firmware
This video will show you how to update...
-
DJI Matrice 210 - Mounting the Upward Gimbal
The Matrice 210 is an image platform that...
-
DJI Matrice 200 - Linking the Aircraft and the Remote Controller
All Matrice 200 remote controllers are linked to...
-
DJI Matrice 200 Series - Updating the Remote Controller Firmware
This video will show you how to update...
-
DJI Quick Tips - Matrice 200 - Mounting the Zenmuse XT with the Adaptive Ring
Matrice 200, mounting the Zenmuse XT with the...
