Matrice 200, mounting the Zenmuse XT with the adaptive ring. Align the wide slot on the adaptive ring with the red dot on the gimbal mount as shown. Rotate the adaptive ring to the right to lock it in place. Ensure that the adaptive ring has been mounted properly. Align the white line on the gimbal with the white line on the adaptive ring and mount the gimbal as shown. Rotate the adaptive ring to the left to lock it in place. Ensure that the gimbal has been mounted properly
DJI Quick Tips - Matrice 200 - Mounting the Zenmuse XT with the Adaptive Ring
Recent Articles
-
DJI Matrice 200 Series - Updating the Aircraft Firmware
This video will show you how to update...
-
DJI Matrice 210 - Mounting the Upward Gimbal
The Matrice 210 is an image platform that...
-
DJI Matrice 200 - Linking the Aircraft and the Remote Controller
All Matrice 200 remote controllers are linked to...
-
DJI Matrice 200 Series - Updating the Remote Controller Firmware
This video will show you how to update...
-
DJI Quick Tips - Matrice 200 - Mounting the Zenmuse XT with the Adaptive Ring
Matrice 200, mounting the Zenmuse XT with the...
