DJI Inspire 1 - Mounting the 1345LS Quick Release Propeller Mounting Plates

This video will show you how to mount the new Inspire 1 1345LS quick release propeller mounting plates. First remove the 2 screws on the propeller mounting plates with a screwdriver. Then remove the original propeller mounting plates and metal gaskets. Mounting the 1345LS quick release propeller mounting plates. A 1345LS quick release propeller mounting plate consists of 4 parts: propeller mount, buckle, metal gasket, base holder. The buckles and propeller mounts with white arrows are fir motors 1 and 3 along with the CCW base holders and the silver gaskets. The buckles and propeller mounts with red arrows are for motor 2 and 4 along with the CW base holders and gold gaskets. To mount a red arrow mounting plate apply a small amount of adhesive to the screw holes on motor 2. Do not let the adhesive overflow to outside the holes. Mount a CW base holder to motor 2 then tighten the screws. Apply a small amount of adhesive to the holes on the base holder. Mount a gold gasket to the propeller mounting plate. Align the holes on the gasket with the holes on the plate. Place the propeller mount onto the buckle. Rotate the propeller mount to align the red arrows. Mount the buckle and the propeller mount to the adapter. Use the screwdriver to align the holes on the base holder gasket and propeller mount. Then tighten the screws. Mount a propeller and rotate the buckle to the locked position. Hold the motor and rotate the propeller to ensure the buckle and propeller are firmly attached. Perform the preceding steps again to attach the other 3 mounting plates.