DJI CrystalSky - Monitor to a Remote Controller (Mavic / Spark)

This video will show you how to mount a 5.5 inch Crystal Sky onto the Mavic series Spark remote controller. unlock the mounting bracket and loosen the 2 screws. The mounting bracket include 3 parts: Part A, Part B and Part, C. Remove the RC cable on the left side of the remote controller. Place Part C in the mobile device clamps and move the cable frame to the right as shown. Fasten the mobile device clamps. Connect the USB cable on Part B to the USB port on the remote controller. Mount Part B to the remote controller and tighten it with screws. Mount Part A to the 5.5 inch Crystal Sky monitor and tighten with the M5 screws. Put the battery into the battery slot and slide it to the right until you hear a click. The battery can be used directly after it is mounted. Unlock Part B and install Part A to Part B. Lock the buckle. Power on the remote controller and the monitor will turn on automatically. Press the settings buttons on the screen as shown. Tap flip screen and the monitor can be used normally.