Spark, activating the spark by using DHI Go 4. Connect the battery to the charger then up the battery and fully charge it. Turn on your aircraft. Power on the remote controller. Check and record the Wi-Fi SSID and password in the battery compartment or on the storage box. Connect your mobile device to the remote controller’s Wi-Fi, the default password is 12341234. Connect your mobile device to the aircraft’s Wi-Fi and enter the default password you’ve recorded. After it connects launch DJI Go 4 app and log into your DJI account. It will prompt you to activate your Spark. Tap next. Read the terms of use carefully. Select the rectangle as shown and tap I agree. Now name your aircraft. Tap continue and set the unit of parameter. Tap continue and turn on the beginner mode. If you are flying spark for the first time it is recommended not to turn off beginner mode for flight safety. Tap continue and turn on enabled advanced gesture control. Tap continue and set a joystick mode. Disconnect your mobile device from the aircraft’s Wi-Fi and connect it to a network with an internet connection. Tap continue and confirm your account. The default activation account is your DJI Go 4 account that cannot be changed after activation. Tap activate and disconnect your mobile device from the internet and connect it to the aircraft’s Wi-Fi. Your Spark has now been activated!
DJI Quick Tips - Spark - Activating the Spark by Using DJI GO 4
Recent Articles
-
Resetting the Wi-Fi SSID and Password
DJI Osmo, restoring default Wi-Fi settings. Power on...
-
DJI Beginner Tutorial Videos - Spark - Mounting the Intelligent Flight Battery
This video will show you how to mount...
-
DJI Beginner Tutorial Videos - Spark - Key Components and Parameters
This video will introduce the main modules of...
-
DJI Spark - Controlling the Aircraft with the Remote Controller
This video will show you how to control...
-
DJI Quick Tips - Spark - Activating the Spark by Scanning the QR Code
Spark, activating the aircraft by scanning the QR...
