Before calibration remove the propellers. Power on the drone and connect to DJI Go 4. Go to main controller settings, advances settings and sensors. Tap calibrate IMU. Calibrate the drone following the on screen instructions. After calibration restart the drone. Note: Do not move the drone during calibration. If the calibration fails several times capture a screen shot of the prompt, export the flight controller data, upload it to a server and contact DJI support.
Phantom 4 Series - Calibrating the IMU
Recent Articles
-
DJI Phantom 4 Pro V2.0 - How to Connect the DJI Goggles
Power on the Phantom 4 Pro V2.0 and...
-
DJI Phantom 4 Pro V2.0 - How to Update the Firmware with a PC
Updating the Phantom 4 Pro V2.0 separately. Before...
-
DJI Phantom 4 Pro V2.0 - Activating the Aircraft
Power on the remote controller and aircraft and...
-
Phantom 4 Series - Calibrating the IMU
Before calibration remove the propellers. Power on the...
-
DJI Phantom 4 Pro V2.0 - Updating the Firmware with DJI GO 4
Remove the gimbal clamp, connect the remote controller...
