DJI Phantom 4 Pro V2.0 - Updating the Firmware with DJI GO 4

Remove the gimbal clamp, connect the remote controller to a mobile device. Ensure that the mobile device is connected to the internet. Power on the aircraft and remote controller. Make sure that the drone’s and remote controller’s battery level is more than 50%. Launch DJI Go 4, ensure that you have the latest version of DJI Go4. The app will automatically detect the firmware version and new firmware update is available will be shown. Tap the notification to enter the update screen. Tap download now and the firmware will automatically down and then start uploading. When update complete is shown the firmware update is finished. If multiple flight batteries need to be updated insert each additional battery into the aircraft and update separately. An inconsistent firmware found prompt will be shown when the battery is inserted. Slide the slider and the drone will automatically update the corresponding module. After the update is successful restart the device. If the battery level is lower than 50% or the device or internet disconnects then the update may fail. Do not power off the aircraft during the update and it is normal for the aircraft to restart automatically.