DJI Phantom 3 SE ? Gimbal Auto Calibration

Fri, Jun 05, 2026 By: Shopify API

Gimbal Auto Calibration Phantom 3 SE. Place the aircraft on level ground. Power on the remote
controller. Power on the aircraft. Connect the mobile device to the remote controller’s Wi-Fi. Launch DJI
Go and tap camera. Tap the icon on the upper right corner to enter general settings and then gimbal
settings. Tap gimbal auto calibration. Tap OK after reading the tips. The aircraft will start calibrating the
gimbal automatically. Please wait until a gimbal calibrated notification is shown in the app. If your
gimbal is skewed after the IMU calibration and gimbal auto calibration after several attempts please go
to dji.com support and repair service and use the online repair request for sending your aircraft back for
diagnosis.

Share on:

Connect with Us

Tags

magento-179 magento-180 magento-181 magento-182 magento-183 magento-184 magento-185 magento-186 magento-187 magento-188 magento-189 magento-190 magento-191 magento-192 magento-193 magento-194 magento-195 migrated