Skip to next element
Free shipping over $599

Phantom 3 Tutorials -How to link the Phantom 3 Standard and Remote Controller

Phantom 3 Tutorials -How to link the Phantom 3 Standard and Remote Controller

This video will show you how to link your Phantom 3 Standard and its remote controller. When the
indicator light at the rear of the aircraft flashes yellow quickly and the indicator light on the remote
controller is solid red you will need to link the remote controller with the aircraft. This video will show
you 2 methods to link the devices. Method 1. Power on the remote controller and the aircraft. Connect
your mobile device to the Wi-Fi network of the remote controller. Enter the password of the Wi-Fi
network, the default password is 12341234. Launch the DJI Go app. Enter the camera interface, select
RC settings, select linking RC, select OK. The remote controller will make a sound to indicate connection.
Turn the aircraft upside down. Find the hole near the aircraft’s landing gears, use a pen or other tool to
press and hold the link button for 2 seconds. The remote controller will stop making sounds and the
indicator light will turn solid green. Select OK when the app shows a notification indicating the RC linking
is successful. Method 2. Power on the remote controller and the aircraft. Press the link button, the
indicator light will blink red when the aircraft is red to link. Turn the gimbal dial to the far left and toggle
the S2 switch back and forth quickly at least 3 times. You will hear a beeping sound when the remote
controller is trying to link to the aircraft. The remote controller will stop making sound and the aircraft
will turn solid green if linking is successful. If linking fails on the first attempt please try again. If linking
fails repeatedly please contact DJI technical support.

Share on: