Skip to next element
Elevate Your Operations with Enterprise Drone Solutions

OSMO Tutorials - How to install and use the OSMO Vehicle Mount

By: Shopify API
OSMO Tutorials - How to install and use the OSMO Vehicle Mount

This video will show you how to install and use the Osmo Vehicle Mount. The Vehicle Mount consists of 2 parts: the universal joint and the suction cap base. Tighten the nut on the ball joint and the mounting angle can be adjusted. Position the joint as desired and tighten the nut. Toggle the switch of the base to the lock position. Find a smooth surface on which to secure your mount. Ensure the suction cups and the surface are clean and without dust. Then stick the suction cups to the surface. Pull the lock on the suction cups after they’re attached to the surface. Screw the Osmo onto the Vehicle Mount’s rosette mount and tighten the lock ring. After adjusting to the desired angel tighten the nut on the ball joint. Please note: when travelling at speeds over 100km/hour or if your vehicle is accelerating quickly your Osmo will go into gimbal into protection mode. Also in low temperature conditions the grip of the suction cups will decrease. Make sure you’re using your vehicle mount responsibly and in the right situations.

Share on:
Connect with Us
Recent Articles
Tags
magento-196 magento-197 magento-198 magento-199 magento-200 magento-201 magento-202 magento-203 magento-204 magento-205 magento-206 magento-207 magento-208 magento-210 magento-211 magento-213 magento-214 migrated
OSMO Tutorials - Activation Steps Before Using OSMO OSMO Tutorials - Activation Steps Before Using OSMO
OSMO Tutorials-How to Install and Use the OSMO Extension Rod and Tripod OSMO Tutorials-How to Install and Use the OSMO Extension Rod and Tripod
Get the latest news