Skip to next element
Free shipping over $599

DJI Mavic Air | Linking the Remote Controller

DJI Mavic Air | Linking the Remote Controller

Mavic Air, linking the remote controller. If the status LED on the remote controller is solid red and the aircraft status indicator blinks yellow quickly then the remote controller needs to be linked to the aircraft. There are 2 ways to link the remote controller. 1. Linking the remote controller with DJI Go 4. Launch DJI Go. Tap enter device. Tap enter camera view. Tap the icon in the upper right corner of the screen and select remote controller settings. Tap linking remote controller and OK. When the remote controller makes a beeping sound the remote controller is ready to be linked.  Press and hold the function button on the tail of the aircraft for about 3 seconds and release it until a beep is heard. The aircraft will start linking and the front LEDs will blink red quickly. When the beeping stops the status LED on the remote controller is solid green and the aircraft’s statues indicator blinks green the linking is successful. When a remote controller linked prompt is shown tap OK. 2. Linking the remote controller without a mobile device. Press and hold the function button on the tail of the aircraft for about 3 seconds and release it when a beep is heard. The aircraft will start linking and the front LEDs will blink red quickly. Press the flight pause button, function button and customizable button at the same time. Release them when the remote controller makes a beeping sound. The linking has started. When the beeping stops the status LED on the remote controller is solid green and the aircraft’s status indicator blinks green then the linking was successful.

Share on: