Authorized Dealer
ABZ Innovation C10 Cleaning Drone Ready to Fly Kit
Other Configurations
Talk to a Drone Nerds expert
Real pilots, Mon-Fri 9-6 ET. Questions, pricing, fleet quotes.
DRONE NERDS RECOMMENDED ACCESSORIES
ABZ C10 High-pressure cleaning, 60 meters up, crew on the ground.
Clean high-rise facades, rooftops and complex structures from the air, with no scaffolding, cranes or rope access. The C10 brings up to 200 bar of pressure and 15 L/min of flow to heights of 60 meters, on the proven ABZ M12 airframe, with radar holding a safe standoff the whole time.
Clean at height.
Skip the scaffolding.
Built on the proven ABZ M12 airframe, the C10 reaches surfaces that are slow, costly or dangerous to access by hand, and gets the job done faster.
-
Reach60mFacades, rooftops and structures up to roughly 197 ft with no scaffolding, cranes or rope-access crews.
-
Pressure and flow200barUp to 15 L/min at up to 2,900 PSI to lift dirt, algae and stubborn grime.
-
Lower cost, lower risk0at heightWorkers stay on the ground. Cuts the labor, equipment and insurance overhead of working at height.
-
Rapid deploymentFastsetupAirborne quickly, so crews spend time cleaning, not rigging access equipment.
High-flow wand
modification.
Available only through Drone Nerds, this US-market upgrade re-tunes the C10 wand for higher flow and pressure built for exterior cleaning. Only the wand is modified; every other part of the certified C10 system stays factory-standard. Switch between two modes to match the job.
-
Mode 1
High-Pressure
High-pressure cleaning for hard surfaces and heavy buildup.
- Recommended flow rate6 GPM
- Recommended pressure3,000 PSI
- Recommended pumpGas-powered
-
Mode 2
Soft-Wash
Soft washing and low-pressure cleaning for delicate or coated surfaces.
- Recommended flow rate14 GPM
- Recommended pressure300 PSI
- Recommended pumpGas-powered
Smart sensing,
stable control.
Onboard radar and dual flight modes keep the C10 a safe, consistent distance from the surface for controlled, repeatable cleaning on demanding jobs.
-
Radar
Collision avoidance
Onboard radar maintains a safe, steady standoff from the surface for controlled, repeatable cleaning passes.
-
Auto
Automated Mission Mode
For large, uniform walls the drone holds its distance and flies a pre-set cleaning loop. RTK positioning is recommended for maximum stability.
-
Manual
Manual Flight Mode
For irregular surfaces, obstacles or windy sites, experienced pilots take full control where radar performance may be limited.
-
CE Β· ISO Β· FCC
Certified for the job
Engineered to hold up to the demands of commercial and industrial environments.
Built for
real jobsites.
From glass towers to solar farms, the C10 is at home wherever access is difficult, dangerous or expensive. Works with a range of professional nozzles and cleaning systems to match the surface and the task.
-
High-rise and glass facades
High-rise buildings, glass curtain walls and complex architectural structures.
Curtain wallTowers -
Industrial, silos and tanks
Industrial surfaces, silos and tanks that are hazardous or costly to clean by hand.
SilosTanks -
Rooftops and solar
Rooftops and solar arrays without the foot traffic that risks damage or injury.
Solar arraysRoofing -
Heritage and hard-to-reach
A controllable option for heritage buildings, monuments and surfaces where access is limited.
MonumentsLimited access
Ready to Fly Kit
or drone only?
Same aircraft, same wand. The kit adds the power you need to run a full shift.
| Included | C10 Ready to Fly Kit | C10 Drone Only β |
|---|---|---|
| C10 drone body | Yes | Yes |
| Battery charger | Yes | Not included |
| Batteries | 4 included | Not included |
| Drone Nerds high-flow wand | Yes | Yes |
| Price | $22,209.00 | $16,648.99 |
Rule of thumb: if this is your first C10, take the kit. Four batteries and the charger are what keep the drone working instead of waiting.
Already have batteries and a charger? See the C10 drone only β
Key specifications
Manufacturer figures. Flow and pressure at the wand depend on the pump and hose you pair with the aircraft.
- Cleaning system
- Max working height60 m (β197 ft)
- Max flowβ15 L/min
- Max pressure200 bar (β2,900 PSI)
- NozzlesQuick-connect, J-Rod compatible
- Hose connectionQuick-connect coupler
- Flight and sensing
- AirframeABZ M12
- Obstacle sensingOnboard radar
- Flight modesAutomated Mission, Manual
- PositioningRTK recommended for Mission Mode
- CertificationsCE, ISO, FCC
- Drone Nerds wand modes
- High-Pressure6 GPM Β· 3,000 PSI
- Soft-Wash14 GPM Β· 300 PSI
- Recommended pumpGas-powered
- Compatible withABZ Innovation C10
- SKUABZC10-RTF
In the box
The Ready to Fly Kit. Add hose length and a prop guard below to match your sites.
- ABZ Innovation C10 drone bodyΓ1
- Drone Nerds high-flow wand (installed)Γ1
- Battery chargerΓ1
- Flight batteriesΓ4
Build the kit
around it.
What our team adds to C10 orders. Hose length is the one decision to make before the first job.
-
Must-haveABZ Innovation Battery
Fits L10, C10, S20 and M12. Four ship in the kit; spares keep the aircraft working while others charge.
Shop battery -
Must-haveABZ Prop Guard for the C10
Protection for close-quarters work around facades, signage and structure.
Shop prop guard -
HoseABZ C10 95 ft Hose (30 m)
For low and mid-rise work where the pump can sit close to the structure.
Shop 95 ft hose -
HoseABZ C10 190 ft Hose (60 m)
Full-height reach for high-rise facades and tall industrial structures.
Shop 190 ft hose
Questions we get
about the C10.
Straight answers from the team that configures and supports these systems.
What does the Drone Nerds wand modification actually change?
Only the wand. It is re-tuned for the US market to deliver higher flow and pressure for exterior cleaning, with two modes: High-Pressure (6 GPM at 3,000 PSI) and Soft-Wash (14 GPM at 300 PSI). Every other component of the certified C10 system remains factory-standard.
When should I use Mission Mode vs Manual?
Automated Mission Mode is for large, uniform walls: the drone holds its standoff and flies a pre-set cleaning loop, and RTK positioning is recommended for maximum stability. Manual Flight Mode is for irregular surfaces, obstacles or windy sites where radar performance may be limited and an experienced pilot should have full control.
What nozzles and hoses does it take?
Quick-connect interchangeable nozzles on the US J-Rod standard, and a quick-connect coupler from wand to hose. We stock 95 ft (30 m) and 190 ft (60 m) C10 hoses; pick by the height of your typical structure.
What pump do I need?
Both wand modes are specified for a gas-powered pump. Match the pump to the mode you'll run most: roughly 6 GPM at 3,000 PSI for high-pressure work, 14 GPM at 300 PSI for soft washing.
What's the difference between the kit and the drone-only listing?
The Ready to Fly Kit adds the battery charger and four flight batteries. The drone-only listing is the aircraft alone for operators who already have ABZ power gear.
Configured by the people
who fly them.
Drone Nerds is an authorized ABZ Innovation dealer and the exclusive source for the C10 high-flow wand modification in the US. Enterprise specialists, agency and fleet purchasing, and support from South Florida.
Authorized ABZ Innovation dealer
Factory-new US stock with full manufacturer warranty.
Exclusive high-flow wand
The US-market wand modification is available only through Drone Nerds.
Enterprise financing and purchasing
Agency POs, Approve financing, and multi-unit pricing for cleaning fleets.
Setup and support
Call 786-708-7807 and reach someone who has configured this system.
DJI Matrice 4E (M4E) Enterprise Mapping Drone with RC Plus 2 Controller
DJI Air 3S Fly More Combo (DJI RC 2) | 1-Inch Dual-Camera 4K Drone
DJI Neo 4K Video Drone Combo with 3 Batteries (Open Box)
DJI Matrice 4T Enterprise Thermal Drone - 640Γ512 Thermal, 48 MP Zoom, Laser Rangefinder
Questions we get
about the C10.
Straight answers from the team that configures and supports these systems.
What does the Drone Nerds wand modification actually change?
Only the wand. It is re-tuned for the US market to deliver higher flow and pressure for exterior cleaning, with two modes: High-Pressure (6 GPM at 3,000 PSI) and Soft-Wash (14 GPM at 300 PSI). Every other component of the certified C10 system remains factory-standard.
When should I use Mission Mode vs Manual?
Automated Mission Mode is for large, uniform walls: the drone holds its standoff and flies a pre-set cleaning loop, and RTK positioning is recommended for maximum stability. Manual Flight Mode is for irregular surfaces, obstacles or windy sites where radar performance may be limited and an experienced pilot should have full control.
What nozzles and hoses does it take?
Quick-connect interchangeable nozzles on the US J-Rod standard, and a quick-connect coupler from wand to hose. We stock 95 ft (30 m) and 190 ft (60 m) C10 hoses; pick by the height of your typical structure.
What pump do I need?
Both wand modes are specified for a gas-powered pump. Match the pump to the mode you'll run most: roughly 6 GPM at 3,000 PSI for high-pressure work, 14 GPM at 300 PSI for soft washing.
What's the difference between the kit and the drone-only listing?
The Ready to Fly Kit adds the battery charger and four flight batteries. The drone-only listing is the aircraft alone for operators who already have ABZ power gear.
In the box
The Ready to Fly Kit. Add hose length and a prop guard below to match your sites.
- ABZ Innovation C10 drone bodyΓ1
- Drone Nerds high-flow wand Γ1
- Battery chargerΓ1
- Flight batteriesΓ4
