Skip to next element
Free shipping over $599

DJI MG 1S | Updating the Aircraft Firmware

DJI MG 1S | Updating the Aircraft Firmware

This video will show you how to update the firmware for your MG-1S aircraft. The MG-1S firmware and remote controller firmware need to be updated separately. The aircraft firmware is updated with DJI Assistant 2. Go to dji.com and enterprise. Visit downloads on the MG-1S product page. Download DJI Assistant 2. Install DJI Assistant 2 and launch it. To power on the aircraft connect the battery to the battery communication port then to the XT90 port. Connect the aircraft to the PC with the Micro USB cable, inserting it into the ISOD data port on the aircraft. Click the MG-1S icon and enter the main screen. Click firmware update. Select the latest firmware version and click upgrade. Click start update. Wait until the update is complete. When the update process shows 100% and an update failed warning is shown it indicates that the update failed. Restart the aircraft and launch DJI Assistant 2 to check whether the current firmware version is the latest. Then the MG-1S aircraft firmware update is complete. If the update fails try to update the firmware again. If it fails several times contact DJI support.

Share on: