This video will show you how to mount the Mavic Pro Propeller Cages. Please keep in mind the following notices before mounting the propeller cages. There are digits on the propeller cage back wall lower bracket and outer ring bracket. Note that #1 is oriented on the front right arm. 2 on the front left arm. 3 on the rear left arm and 4 on the rear right arm. Do not mount them wrongly. Mount the propeller cages after unfolding the arms. After mounting the propeller cages do not fold the arms. Pease use propeller cages together with 7728 quick release folding propellers. Perform the following steps to mount the propeller cages. First remove the propeller from the aircraft. Open the buckle. Mount the propeller cage with #1 printed on the buckle to the front right arm motor. Fasten the buckle. When the click is heard the propeller cage is mounted firmly. Perform the proceeding steps to mount the propeller cage with #4 printed on the buckle to the rear right motor. After mounting, fix the front arm propeller cage and the rear arm propeller cage with the securing lock as shown. Perform the same steps to mount the left propeller cages.
After mounting propeller cages launch DJI Go 4. Go the main controller setting, advanced settings, and turn on propeller cage. Mounting the 7728 quick release folding propellers. Note that the white ringed propeller is for the motor with white marks. While the propeller without a white ring is for the motor without white marks. Pinch the side hole of the propeller cage to fix motor. Mount the folded propeller to the propeller cage and align the propeller with the motor as shown. Press down and turn the propeller to lock the direction until it is secured in its position. Unfold propellers and check whether the propellers scratch the propeller cage. Perform the proceeding steps to mount the other propellers.