Matrice 200 Series - How to Set Master and Slave Remote Controllers

The Matrice 200 series drones support DJI’s standard remote controller and Cendence. When setting the master and salve remote controllers you can use either type of these 2 remote controllers interchangeably. Let’s use 2 Cendence remote controllers as an example. Connect the master remote controller and salve remote controller to their respective mobile devices. Power on the remote controller and drone. Launch DJI Pilot (DJI GO 4) on the mobile device connected to the master remote controller. Tap manual flight. Tap remote controller settings. Select master beside master and salve. Note down the master remote controller’s ID and authorization code. Launch DJI Pilot (DJI Go 4) on the mobile device connected to the salve remote controller. Tap manual flight, tap remote controller settings. . Select slave beside master and salve. Tap search master. Select the remote controller in the master list. Enter the master controller’s authorization code and connect the salve remote controller to it. If the slave remote controller needs to control the gimbal tap request gimbal control. Move the slave’s control sticks to check whether the gimbal can be controlled.