Inspire 1 Tutorials - How to link the Remote Controller

This video will show you How to link the Inspire 1 with the remote controller. First power on the remote controller and connect it to the mobile device. Then power on the aircraft. Launch the DJI Go app on your mobile device and tap camera. Tap the remote controller icon. Make sure that the remote controller is set to master mode. Tap RC control settings, choose linking remote controller. Tap OK. The app displays a count down and the remote controller starts making a beeping sound. Locate the red linking button on the right of the aircraft. Press the button for 3 seconds and then release. The app will display a message showing that the linking has succeeded and the beeping sound stops. If the linking fails please check the firmware versions of the Inspire 1 and the remote controller and make sure that they are consistent. If the firmware versions of the Inspire 1 and remote controller are consistent and the linking still fails please contact DJI after sales service.