This video will show you how to activate the Mavic Pro Platinum. Connect your mobile device and remote controller with the USB cable. Power on the remote controller and the aircraft. Launch DJI Go 4, an activation prompt will pop up. Tap next and read the terms of use carefully. Name your Mavic Pro Platinum. After you’ve names your aircraft tap continue and set a stick mode, the default stick mode is mode 2. You can set a customized mode under remote controller setting after activation. Tap continue. Next you can assign various commands top the C1 button and C2 button on the back of the remote controller. Tap continue to view to LCD introduction screen. Tap continue and then select your desired measurement system and video format. Tap continue to enter beginner mode settings. The aircraft is set to beginner mode by default. I beginner mode the aircraft wont takeoff without GPS signal and flight altitude and distance will be limited to 98 feet or 30 meters. Tap continue to conform your account’s email address. Please note that the account you use to activate your Mavic Pro cannot be changed later. The aircraft’s information will be bound to your account permanently. Your account will serve as proof of your warranty if you apply for customer service. Tap activate. Your aircraft has not been activated
Mavic Pro Platinum – Activating the Aircraft
Recent Articles
-
Mavic Pro - Entering Wi-Fi Mode
Mavic Pro, entering Wi-Fi mode. Open the SD...
-
DJI Mavic Pro – How to Replace the RC Cable and Slider
Unfold the remote controller’s left mobile device clamp....
-
Linking the Remote Controller without DJI GO 4
Mavic Pro, linking the remote controller without the...
-
Attaching the Gimbal Clamp
Mavic Pro, attaching gimbal clamp. With the Mavic...
-
DJI Mavic Pro – Attaching Propeller Guards
Mavic Pro, attaching propeller guards. Check the letter...
