Before the update go to the enterprise page on DJI’s official website. Click Zenmuse XT2 and download the latest firmware under downloads. Copy and paste the firmware’s .bin file to the root directory of an SD card. Insert the SD card into the Zenmuse XT2 and mount the Zenmuse XT2 to the drone. Then power on the drone. After the gimbal is powered on and starts the self-check the firmware update will automatically start and the Zenmuse XT will begin to make beeping sounds. Note: Do not power off the drone or remove the gimbal during the update as the camera may be damaged. After the update you can export the log file from the SD card to check the update record. Open the log file and check the word beside result to view the update’s result. If you have any questions contact DJI support.
Zenmuse XT2 | Updating the Firmware
Recent Articles
-
Matrice 200 Series V2 - How to Link the Remote Controller to the Aircraft
If a “No Connection” prompt appears on the...
-
DJI Quick Tips - Matrice 200 - Mounting the Zenmuse XT with the Adaptive Ring
Matrice 200, mounting the Zenmuse XT with the...
-
FlightHub - Introduction and Demonstration
DJI flight hub is a software platform that...
-
Matrice 200 Series - How to Set Master and Slave Remote Controllers
The Matrice 200 series drones support DJI’s standard...
-
DJI Zenmuse XT 2 - How to use MSX
Power on the remote controller and the aircraft....
