Dronetag Beacon

Slap-on device so your drone can legally fly

Effortless way to let your drone fly safe & compliant in EU and US regions.
Direct / Broadcast Remote Identification device compatible with any drone.

Dronetag Mini and Dronetag Beacon held together on a hand

Direct / Broadcast Remote Identification

New regulations are forcing professional pilots in EU & US regions to make their drones digitally visible. We created Beacon, the add-on that makes drones instantly compliant with the latest DRI standards. Upgrade your existing drone, without the need to purchase new aircraft.

Slap the Dronetag Beacon on and instantly enhance your drone with DRI capability. The tiny device transmits the drone location via Bluetooth to up to a 3 km (1.86 miles) range.

Supported regions

European Union

ASD-STAN

Compliant with prEN 4709-002 which requires Direct Remote Identification for drones above 250 grams flying below 120 meters in the Specific category.

USA

ASTM

Compliant with ASTM F3411 which requires Broadcast Remote ID for all pilots flying out of FAA-recognized identification areas.

Other countries

As Beacon is only transmitting data via Bluetooth, it is usable anywhere in the world. All countries using ASD-STAN or ASTM standard are supported. Check your local rules.

16 Grams Packed with Technology

With the size of 2 chocolate bar squares (16 g / 0.56 oz), Beacon opens the door to the digital experience for drones of all sizes.

Everywhere, Everytime, Ever

Fit the Beacon to nanoweight drone or large UAV. Unparalleled up to 16 hours of battery life gives you enough time to accomplish the wildest missions. Reclosable dual lock fastener so strong that you can lift an average drone by it. Worldwide supported Bluetooth technology and the finest geolocation standards.

Dronetag App | Available on all devices

Manage your devices, check the airspace zones, plan your flights, inspect airborne drones with their flight itineraries, and notify other pilots about any airspace hazards. All that in one app, the Dronetag App.

Show your drone on flight radar.

Slap on this tiny beauty and let your drone fly safe & compliant.

The sturdy 3D printed box packed with technology instantly enhances any drone with a DRI feature.

All Data Snug and Secured

With over-the-air firmware updates and data encryption, your information will be safe and neatly organized in the mobile app.

Multiple geolocation standards

Receiving signals from GPS, GLONASS, Galileo, and SBAS for robust and reliable positioning.

Instant Direct Remote ID upgrade

Compliant with Direct / Broadcast Remote ID according to the prEN 4709-002 and ASTM F3411 standards.

Internal Bluetooth & GNSS antennas

With an option to add external Bluetooth antennas for better signal reception.

Unparalleled up to 16 hours of battery life

Or use your drone as the power source for carefree flying without worrying about charging several devices.

Worry-free flight from take-off to landing

Beacon warns other nearby pilots about potential dangers during take-off, landing, or when free-fall is detected.

Precise sensors onboard

GNSS position estimation, pressure altitude measurement, and motion detection via accelerometer.

MAVlink & DJI A3 support

Professional DJI and Pixhawk flight controllers integration via our EXT port to connect to the drone's flight data.

Short-range radio: Bluetooth 2.4GHz
Sensors: GNSS, barometer, accelerometer
Positioning: GPS L1, GLONASS L1, Galileo E1, SBAS
Built-in Antennas: Bluetooth and GNSS
Optional Antennas: Bluetooth via MMCX plugs
External ports: Charging: 5V to USB-C
Battery: LiPo 3.7V 200 mAh
Battery life: 8-16 hours (depending on the configuration)
Charging: 5V Micro USB
Charging time: 2 hours from a discharged state
Average current consumption: 15mA
Maximum current consumption: 100mA
Enclosure: Plastic
Fastening mechanism: 3M Dual-lock SJ4570
IP rating: IP43
Operating temperature: -20 °C to +60 °C (-4 °F to 140 °F)
Dimensions: 37—26—16 mm (1.5—1.0—0.6 in)
Weight: 16 grams (0.56 oz)

How does V2 Differ from V1?

Extended battery life, now reaching up to 18 hours.
Integration of a High-precision & Ultra-low-power GNSS Ublox M10 Receiver.
Transition to a new USB C connector, replacing the previous Micro USB.
Removal of the external connector for the Bluetooth antenna.
The exclusion of the Extension Port (integration of Professional DJI and Pixhawk flight controllers is exclusively available to Enterprise customers).

Dronetag

Filter by

filter and sort

Manufacturer

Price Range

More filters

Sort by

Sort by

Get the latest news