Skip to product information
DJI E-Port Development Kit
DJI E-Port Development Kit
DJI E-Port Development Kit
DJI E-Port Development Kit
DJI E-Port Development Kit
DJI E-Port Development Kit

DJI E-Port Development Kit

$59.00

DJI AUTHORIZED DEALER
Convert the aircraft E-Port into multiple standard hardware ports. Convenient for connecting hardware equipment, SDK development, and debugging.
Free shipping over $599.00
Money Back Guarantee

DRONE NERDS RECOMMENDED ACCESSORIES

DJI Matrice 350 RTK Worry Free Basic Combo

$11,729.00
DJI Matrice 350 RTK Worry Free Basic Combo
DJI Matrice 350 RTK Worry Free Plus Combo

$12,559.00
DJI Matrice 350 RTK Worry Free Plus Combo
DJI TB65 Intelligent Flight Battery

$700.00
DJI TB65 Intelligent Flight Battery
DJI BS65 Intelligent Battery Station

$1,200.00
DJI BS65 Intelligent Battery Station
DJI Matrice 350 RTK 2110s Propellers (Pair)

$39.00
DJI Matrice 350 RTK 2110s Propellers (Pair)
DJI Matrice 350 RTK 2112 High-Altitude Low-Noise Propellers (Pair)

$39.00
DJI Matrice 350 RTK 2112 High-Altitude Low-Noise Propellers (Pair)
DJI Matrice 350 RTK Gimbal Damper

$11.00
DJI Matrice 350 RTK Gimbal Damper
DJI E-Port Development Kit

DJI E-Port Development Kit

$59.00
ADD TO CART
The development kit can convert the E-Port of the aircraft into multiple standard hardware ports like the XT30 Power Output Ports, USB 2.0 Port, and UART/PPS Signal Port, making it convenient for developers to connect hardware equipment and perform SDK development and debugging.
SHORT DESCRIPTION
Convert the aircraft E-Port into multiple standard hardware ports. Convenient for connecting hardware equipment, SDK development, and debugging.
SKU
CP.EN.00000459.01
Manufacturer
DJI
UPC
190021087088
compatible with
DJI Matrice 350 M350
open box
No


1. When using the adapter board, make sure to place it in an appropriate position to avoid short circuits caused by contact between the adapter board and the aircraft arm.

2. If the adapter board is integrated into a payload product, make sure to design a heat dissipation system and a metal shielding cover.

3. If any sparks, smoke, strange smells, or other abnormalities are detected, disconnect the adapter board from the power source immediately.

4. When all three XT30 power ports are used, the total output power should be smaller than the max output power of the aircraft. Make sure to develop payloads within the output specifications.


E-Port Adapter Board × 1

Pin Header Protector × 1

E-Port Coaxial Cable (150 mm) × 1

XT30 to USB-C Power Cable (300 mm) × 1

XT30 to DC5.5 Power Cable (300 mm) × 1